Engineering Courses

Read More

Showing 1–9 of 152 results

Modal and Frequency Analysis in Abaqus

 70.0
Modal analysis is a technique used to understand how structures and systems vibrate when subjected to forces. It identifies natural frequencies, which are frequencies at which a system vibrates without external excitation, and mode shapes, representing unique patterns of motion. Engineers use modal analysis to design systems resistant to unwanted vibrations, preventing resonance and potential damage. Frequency response analysis evaluates a structure's reaction to specific excitations across varying frequencies, aiding in design optimization to mitigate fatigue damage caused by vibrations. In Abaqus software, modal analysis identifies natural frequencies and mode shapes, while frequency response analysis predicts a structure's response to excitation across a frequency range. Workshop 1 analyzes the natural frequency of a water transfer tube to predict resonance occurrence or potential issues from vibrations. Workshop 2 simulates the dynamic analysis of a frame under a sudden load, determining modes, natural frequencies, and transient dynamic response. Workshop 3 simulates free and forced vibrations of a wire under harmonic excitation, examining resonance phenomena with preloading and spring-damper configurations. These workshops demonstrate practical applications of modal and frequency response analyses in structural dynamics simulation and design. Notice: This package will be available one week after purchase.

Mixing tank simulation with Ansys fluent(2D and 3D)

 100.0
Notice: This package will be available one week after purchase. The mixing process is crucial and highly effective in various industrial applications. It finds application in industries such as food and cement manufacturing, among others. This course focuses on the implementation of mixing processes in both 2D and 3D spaces. This course begins with designing the geometry with complete details. Next, we learn how to use Ansys Meshing software to mesh the geometry in detail and assess the mesh quality. Following this, we apply appropriate two-phase and turbulence models to simulate the process, allowing us to analyze the results. Additionally, we create animations of the process to visualize how the mixing process occurs.

Simulation and analysis of a 6-cylinder V engine with MSC Adams

 100.0
Notice: This package will be available one week after purchase. Human blood is a vital fluid that circulates through the body, carrying oxygen, nutrients, hormones, and immune cells. Simulation of human blood is crucial for understanding cardiovascular diseases, hemodynamics, and therapeutic interventions. It enables researchers to study the complex behavior of blood flow, investigate disease mechanisms, and develop improved diagnostic and treatment strategies. This package contains three workshops that would help you simulate blood flow in vessels: “Human blood with coronary vessel Fluid Structure Interaction simulation in Abaqus”, “Blood and vessel FSI simulation using Abaqus-Co Simulation process”, and “Non-Newtonian blood flow Simulation in Abaqus”.

Short fiber composite damage (Mean Field Homogenization Model)

 220.0
Short-fiber reinforced thermoplastics are popular in industry for their strength, lightness, and cost-effectiveness. Injection molding enables the creation of complex parts with dispersed short fibers. Failure in these materials is complex, involving various mechanisms like fiber cracking and plastic deformation. Current models for damage and failure are either macroscopic or simplified. A new method evaluates stiffness using continuum damage mechanics. It involves a two-stage model: first, fibers are split into groups (grains), then mean-field homogenization averages stiffness across phases, followed by overall homogenization. This approach simplifies composite geometry modeling. The method was tested on a distal radius plate, calibrated using experiments, and simulated using Abaqus finite element software with UMAT subroutine for damage and input file(INP) code has been used for homogenization. Notice: This package includes instructional video of simulation along with a PDF file explaining the theory and all relations in the package.

Customized package

 1759.0
Video tutorial step by step All Software and required files(codes , documents and etc.) Works for all versions Money-back guarantee Free 24/7 online support Certification Access for life Updated content Prepared by High level professors or researchers or students (more info) All payment method (Credit or debit card, PayPal, and etc). Costumers from Big companies, universities (more info) Short but full Safe payment

Tread wear simulation in Abaqus

 170.0
(1)
This training package provides a comprehensive exploration of tire tread wear, focusing on its simulation using the UMESHMOTION subroutine in ABAQUS. Tread wear, the gradual erosion of a tire's outer rubber surface, impacts crucial performance aspects like traction and handling. The package elucidates the importance of tread wear simulation, emphasizing safety, performance optimization, regulatory compliance, durability, cost efficiency, environmental impact, and consumer confidence. The UMESHMOTION subroutine, a key element in ABAQUS, is demystified through illustrative examples. Its application in modeling wear processes, specifically employing the Archard model, is highlighted—particularly in node movement specification during adaptive meshing. The workshop within this package delves into simulating tire wear at a speed of 32 km/h over 1000 hours, utilizing the UMESHMOTION subroutine and Archard equations. The tire modeling process, transitioning from axisymmetric to three-dimensional elements, is detailed, considering both slip and non-slip modes of movement. This resource serves as a valuable guide for professionals and enthusiasts seeking to understand and implement effective tread wear simulation techniques using advanced computational tools.

Simulation of Hydroforming using VDLOAD subroutine in Abaqus

 170.0
(1)
Explore the fundamentals of hydroforming simulation in Abaqus alongside the VDLOAD subroutine with our comprehensive guide. This tutorial unravels the essence of hydroforming, a specialized metal shaping technique applicable to diverse materials like steel, copper, and aluminum. Delve into the intricacies of sheet and tube hydroforming, crucial in manufacturing components for automotive, aerospace, and medical industries. The workshop component specifically delves into advanced hydroforming simulation using the VDLOAD subroutine, emphasizing its role in specifying fluid pressure. Learn the application of the Smooth Amplitude option for defining part displacement without introducing dynamic changes during problem-solving. Conclude with a comparative analysis of simulation outcomes, exploring scenarios with and without fluid pressure, complemented by discussions on subroutine writing. This guide offers a straightforward exploration of hydroforming and VDLOAD, providing valuable insights for efficient and accurate simulations.

Shape optimization in Abaqus

 150.0
(1)
Shape optimization is employed towards the conclusion of the design process, when the overall structure of a component is established and only minor adjustments are permitted by relocating surface nodes in specific regions. In shape optimization, the displacements of the surface nodes (design nodes) serve as the design variables. The process commences with a finite element model that requires slight enhancements or with a finite element model derived from a topology optimization. In this training package, first, you will learn the concept of optimization and shape optimization in Abaqus. After that, all required settings to do a shape optimization, such as optimization task and design responses will be fully explained. And in the last lesson, you will learn how to create an optimization process and be familiar with the generated files by the shape optimization process.

Topology Optimization in Abaqus

 150.0
(2)
Optimization is a fundamental concept used to enhance the effectiveness and efficiency of systems, designs, and decisions. It finds application in various domains, including industrial processes, finance, and communication networks. In engineering, optimization plays a crucial role in improving the design of systems and structures by maximizing performance and minimizing costs, weight, or other parameters. Structural optimization specifically focuses on designing or modifying structures to meet performance criteria while minimizing or maximizing objectives such as strength, weight, cost, or efficiency. The Abaqus software provides comprehensive structural optimization capabilities, including topology, shape, sizing, and bead optimization. This training package primarily focuses on topology optimization. Through the lessons and workshops, you will gain insights into the tips, tricks, and techniques for effectively utilizing topology optimization within the Abaqus software.