Showing 1–9 of 68 results

Short fiber composite damage (Mean Field Homogenization Model)

 220.0
Short-fiber reinforced thermoplastics are popular in industry for their strength, lightness, and cost-effectiveness. Injection molding enables the creation of complex parts with dispersed short fibers. Failure in these materials is complex, involving various mechanisms like fiber cracking and plastic deformation. Current models for damage and failure are either macroscopic or simplified. A new method evaluates stiffness using continuum damage mechanics. It involves a two-stage model: first, fibers are split into groups (grains), then mean-field homogenization averages stiffness across phases, followed by overall homogenization. This approach simplifies composite geometry modeling. The method was tested on a distal radius plate, calibrated using experiments, and simulated using Abaqus finite element software with UMAT subroutine for damage and input file(INP) code has been used for homogenization. Notice: This package includes instructional video of simulation along with a PDF file explaining the theory and all relations in the package.

Tread wear simulation in Abaqus

 170.0
(1)
This training package provides a comprehensive exploration of tire tread wear, focusing on its simulation using the UMESHMOTION subroutine in ABAQUS. Tread wear, the gradual erosion of a tire's outer rubber surface, impacts crucial performance aspects like traction and handling. The package elucidates the importance of tread wear simulation, emphasizing safety, performance optimization, regulatory compliance, durability, cost efficiency, environmental impact, and consumer confidence. The UMESHMOTION subroutine, a key element in ABAQUS, is demystified through illustrative examples. Its application in modeling wear processes, specifically employing the Archard model, is highlighted—particularly in node movement specification during adaptive meshing. The workshop within this package delves into simulating tire wear at a speed of 32 km/h over 1000 hours, utilizing the UMESHMOTION subroutine and Archard equations. The tire modeling process, transitioning from axisymmetric to three-dimensional elements, is detailed, considering both slip and non-slip modes of movement. This resource serves as a valuable guide for professionals and enthusiasts seeking to understand and implement effective tread wear simulation techniques using advanced computational tools.

Simulation of Hydroforming using VDLOAD subroutine in Abaqus

 170.0
(1)
Explore the fundamentals of hydroforming simulation in Abaqus alongside the VDLOAD subroutine with our comprehensive guide. This tutorial unravels the essence of hydroforming, a specialized metal shaping technique applicable to diverse materials like steel, copper, and aluminum. Delve into the intricacies of sheet and tube hydroforming, crucial in manufacturing components for automotive, aerospace, and medical industries. The workshop component specifically delves into advanced hydroforming simulation using the VDLOAD subroutine, emphasizing its role in specifying fluid pressure. Learn the application of the Smooth Amplitude option for defining part displacement without introducing dynamic changes during problem-solving. Conclude with a comparative analysis of simulation outcomes, exploring scenarios with and without fluid pressure, complemented by discussions on subroutine writing. This guide offers a straightforward exploration of hydroforming and VDLOAD, providing valuable insights for efficient and accurate simulations.

Curing process simulation in Abaqus

 250.0
Fiber-reinforced composites have found widespread use across various fields due to their remarkable properties. This necessitates a careful design of their manufacturing processes to attain industrial application quality. The critical factor influencing their quality is the curing process, wherein the resin transforms into a solid state under temperature cycles. However, the challenge lies in achieving optimal curing quality while maintaining production efficiency. To overcome this challenge, an effective approach involves utilizing numerical simulations to optimize temperature cycles during curing. Nonetheless, creating such a model is complex as it must consider multiple factors concurrently, including temperature release from chemical reactions, shrinkage strains, and stress resulting from temperature variations, topics covered in this package. The package begins with an introduction to fiber-reinforced composites, exploring their advantages, applications, and categorization. It guides you through the fabrication process, detailing curing techniques and associated challenges. Furthermore, the package introduces constitutive equations for simulating the curing process and the necessary Abaqus subroutines for implementation. Additionally, two practical workshops are included to offer experience in modeling the curing process with Abaqus. These workshops enable you to evaluate internal heat generation and analyze strain and stress distributions. They not only provide guidance on simulation and subroutine implementation but also are provided for verification purposes.

Creep Analysis in Abaqus

 120.0
(1)
In engineering, creep phenomenon refers to the gradual deformation or strain that occurs in a material over time when it is subjected to a constant load or stress (usually lower than yield stress) at high temperatures. It is a time-dependent process that can lead to the permanent deformation and failure of the material if not properly accounted for in design considerations. Creep analysis is vital in engineering to understand material behavior under sustained loads and high temperatures. It enables predicting deformation and potential damage, ensuring safe and reliable structures. Industries like power generation and aerospace benefit from considering creep for long-term safety and durability of components. In this training package, you will learn about Creep phenomenon and its related matters; you will learn several methods to estimate the creep life of a system’s components, such as Larson-Miller; moreover, all Abaqus models for the creep simulation such as Time-Hardening law and Strain-Hardening law will be explained along with Creep subroutine; also, there would be practical examples to teach you how to do these simulations.

Abaqus Damage Model for Thermoplastic Polymers with UMAT Subroutine

 320.0
(1)
Thermoplastic polymers are materials composed of long molecular chains primarily consisting of carbon. These polymers possess the unique ability to be shaped and molded under heat and pressure while retaining their stability once formed. This high formability makes them widely used in various industries, including furniture production, plumbing fixtures, automotive components, food packaging containers, and other consumer products. This package introduces a thermodynamically consistent damage model capable of accurately predicting failure in thermoplastic polymers.  The implementation of this model is explained through the use of an ABAQUS user material (UMAT) subroutine. The package is structured as follows. The introduction section Provides an overview of thermoplastic polymers and their mechanical properties. In the Theory section, the constitutive damage model and its formulation are reviewed. Then, an algorithm for numerically integrating the damage constitutive equations is presented in the Implementation section. In the UMAT Subroutine section, a detailed explanation of the flowchart and structure of the subroutine is provided. Finally, two simulation examples, namely the T-fitting burst pressure test and the D-Split test, are performed and the obtained results, are investigated. Notice: Software files and A full PDF guideline (Problem description, theory, ...) are available; Videos are coming soon.

Abaqus for Civil Engineering Part-1

 1424.0
The "Abaqus for Civil Engineering” package is a comprehensive and invaluable resource designed to cater to the needs of civil engineering professionals, students, and enthusiasts alike. This all-inclusive package comprises a collection of several specialized tutorial packages, making it an essential tool for mastering various aspects of civil engineering. With this package, you gain access to an extensive library of high-quality video tutorials that cover a wide range of topics within civil engineering. Each tutorial provides clear, concise, and engaging explanations of fundamental concepts, advanced techniques, and practical applications.

DISP and VDISP Subroutines in ABAQUS

 120.0
(1)
In a very simple form, DISP and VDISP subroutines are used to define user-defined boundary conditions. For example, when you need to define a boundary condition to be time-dependent, location-dependent, or even both, you should use the DISP and VDISP subroutines. ABAQUS features cannot be sufficient for problems with location-dependent and time-dependent boundary conditions simultaneously. In these cases, this subroutine can be useful to solve the challenges. In This package, you will understand the usages of these subroutines and how to work with them in three conceptual and simple workshops.

Arc welding simulation in Abaqus

 39.0
(1)
Notice: This package will be available one week after purchase. Arc welding is a fusion process that involves joining metals by applying intense heat, causing them to melt and mix. The resulting metallurgical bond provides strength and integrity to the welded joint. Arc welding is widely used in various industries for fabricating structures and components. Arc welding simulation in Abaqus is essential for optimizing the welding process and ensuring high-quality welds. It allows engineers to predict and analyze factors such as temperature distribution, residual stresses, distortion, and microstructure evolution during welding. By accurately simulating the welding process, parameters like welding speed, heat input, and electrode positioning can be optimized to achieve desired weld characteristics and minimize defects.