4o
Lesson 1-1: ABAQUS/CAE Introduction
Lesson 1-2: Finite Element Method Introduction
Lesson 1-3: Different elements introduction in ABAQUS
Lesson 1-4: Types of analysis
Lesson 1-5: Some consideration in EXPLICIT Analysis
Lesson 1-6: buckle and frequency analysis
Lesson 1-7: Cohesive Behavior in Abaqus
Lesson 1-8: Damage information in Abaqus
Workshop 2-1: Simulation of Ultra-High-Performance-Fiber-Reinforcement Concrete column in cyclic loading
Workshop 2-2: Finite element simulation of Ultra-High-Performance Concrete beam-column joint in cyclic loading
Lesson 2-1: Abaqus composite modeling of Woven & Unidirectional + RVE method
Lesson 2-2: Damage information for structures
Workshop 2-3: Dynamic compression test of in concrete column reinforced with CFRP bars
Workshop 2-4: Finite element Analysis of hollow-core square reinforced concrete columns wrapped with CFRP under compression
Workshop 2-5: Axial compression in the damaged CFRP reinforced concrete column with initial residual stress
Workshop 2-6: Damaged concrete beam with initial residual stress reinforced CFRP sheet in bending loading
Workshop 2-7: Damage analysis of concrete beam-column joints simulation in cyclic loading
Workshop 2-8: FEM analysis of Elliptical ultra-high-performance concrete-filled steel tabular column under a compression loading
Workshop 2-9: Three points bending of High Strength Concrete(HSC) beam Simulation
Workshop 2-10: Flexural behavior of reinforced concrete beams strengthened with ultra-high performance concrete Analysis in Abaqus
Workshop 2-11: Finite element simulation of ECC/Concrete Composite Beam-Column Joints in axial loading
Workshop 2-12: Circular concrete-encased concrete-filled steel tube (CFST) stub columns simulation subjected to axial compression
Workshop 2-13: Axial compression loading simulation in the Ultra-High-Performance Fiber Reinforced Concrete Column
Workshop 2-14: Static and dynamic analysis of Concrete beam in bending loading
Workshop 2-15: Simulation of Flexural Behavior of Concrete Filled Square Steel Tube in Inner CFRP Circular Tube
Workshop 2-16: Damage Investigation of the concrete-filled double skin steel tube in dynamic bending
Workshop 2-17: Simulation of composite column(steel beam and concrete) in cyclic loading
Workshop 2-18: Failure analysis of concrete cover separation in FRP plated in RC beam
Workshop 2-19: Finite element simulation of reinforced concrete beams externally strengthened in flexure with side-bonded CFRP laminates
Workshop 2-20: steel-concrete composite column simulation in vertical and horizontal loading
Lesson 2-3: Heat transfer and Coupled temperature-displacement analysis
Lesson 2-4: ABAQUS Sequential Solution Software
Lesson 2-5: Lemaitre Damage model implementation with VUMAT Abaqus
Workshop 2-21: Damage mechanism and response of reinforced concrete containment structure under internal explosion
Workshop 3-1: Abaqus simulation of embankment construction with geocell on the saturate soil
Workshop 3-2: Abaqus simulation of Pressure Distribution on Subgrade Soil Underlying Geocell Reinforced Foundation Bed
Workshop 3-3: Abaqus simulation of geosynthetic-reinforced soil retaining wall
Workshop 3-4: Abaqus simulation of concrete piled raft interacted with soil
Workshop 3-5: Abaqus simulation of earthquake over a concrete tunnel having interaction with soi
Workshop 3-6: Abaqus simulation of embankment and excavation on saturated soil
Workshop 3-7: Simulation soil consolidation in interaction with concrete pile in Abaqus
Workshop 3-8: Abaqus simulation of geosynthetic-reinforced soil retaining wall besides heap soil
Workshop 3-9: Abaqus simulation embankment construction on saturate soil floor
Workshop 3-10: Aabqus simulation of TBM modeling into the dry mix with saturate soil
Workshop 3-11: Abaqus simulation Pile in interaction with soil under vertical load
Workshop 3-12: Simulation Concrete wall in the soil in Abaqus
Workshop 3-13: Earthquake over gravity dam in interaction with water and soil using Abaqus
Workshop 3-14: Simulation sequential embankment construction and earthquake analysis after it in Abaqus
Workshop 3-15: Simulation Sequential Construction of an Embankment on a Clay Layer in Abaqus
Workshop 3-16: Abaqus simulation and calculation of the total load capacity of the pile group
Workshop 3-17: Simulation bearing capacity of a three-dimensional square foundation in Abaqus
Workshop 3-18: Abaqus simulation end bearing capacity of a pile under rapid load
Workshop 3-19: Simulation Bearing Capacity Failure of a Strip Foundation in Abaqus
Workshop 3-20: Abaqus simulation and calculate the long-term load capacity of a pipe pile
Workshop 4-1: Impact Simulation against water-filled X65 steel pipes in ABAQUS
Workshop 4-2: Numerical simulation of failure modes of concrete gravity dams subjected to an underwater explosion in Abaqus
Workshop 4-3: Simulation of water sloshing in the concrete tank under earthquake load in Abaqus
Workshop 5-1: Simulating the failure of bolts at the connection between steel beams and columns
Workshop 5-2: Modeling the dynamic failure of bolts at the joint between steel plates
Workshop 5-3: The simulation of double-angle connections of steel bolts under dynamic load
workshop 5-4: Bolt failure simulation on the steel beam and column connection in Abaqus
Lesson 6-1: Plasticity hardening in Abaqus
Workshop 6-1: Abaqus simulation of crack growth in the RC beam under 5 points bending
Workshop 6-2: Abaqus simulation of crack growth of a concrete wall under normal and transverse loading
Workshop 6-3: Abaqus simulation of crack growth of a bone under 3 points bending
Workshop 6-4: Abaqus simulation of crack growth in a concrete having wood shavings aggregates
Workshop 6-5: Abaqus simulation of crack growth in the Koyna dam under seismic loading
Workshop 6-6: Abaqus XFEM simulation of three-dimensional crack growth in the concrete slab
Workshop 6-7: Crack modeling and mechanical fracture parameter in the four-point bending test in Abaqus
Workshop 6-8: Abaqus XFEM simulation of crack growth in the concrete
Workshop 6-9: Abaqus simulation of crack growth of a pressure vessel using XFEM
Lesson 6-2: Dload and VDOALD subroutine
Workshop 6–10: Simulation of ellipsoid crack in the pressure vessel using Dload subroutine
Lesson 6-3: Continuously Reinforced Concrete Pavement modeling (CRCP)
Workshop 6-11: CRCP cracking analysis
Workshop 6-12: CRCP cracking analysis
Workshop 7-1: Damage analysis of an underground box tunnel subjected to surface explosion
Workshop 7-2: Tunnel dynamic analysis subjected to internal blast loading using CEL method
Workshop 8-1: Masonry wall behavior under coupled Eulerian-Lagrangian explosion
Workshop 8-2: Micro modeling of masonry wall (brick wall) in Abaqus and investigation of rocking mode fracture
Workshop 8-3: Numerical simulation of reinforced bricks masonry beams using GFRP reinforcement in Abaqus
Workshop 8-4: Abaqus micro model simulation of earthquake load over masonry wall
Reviews
There are no reviews yet